KWR XCT-1 Instructions

Operating the Screw-Down Crown

The KWR XCT-1 is equipped with a screw-down crown.
⚠️ Important: To ensure the water resistance of the carbon case, always screw the crown back in fully after each use.

Instructions

Step 1 – Manual Winding (Position 1)

- Turn the crown counterclockwise approximately 5 times.

- Screw the crown back in fully.

- Repeat this operation 2 to 3 times if the watch has not been worn for several days.

Step 2 – Setting the Time (Position 2)

- Turn the crown counterclockwise approximately 6 times.

- Pull the crown out one notch (Position 2).

- Set the time by turning the hands.

- Once the time is set, carefully screw the crown back in fully against the case.

Summary of crown positions

Screwed-in position: maximum water resistance.

Position 1: manual winding.

Position 2: time setting.

Why a digital manual?

At KWR, we have chosen to offer a digital manual.
This responsible choice reduces the environmental impact while providing a modern and practical solution.
The documentation is accessible at any time, from any connected device.

Related Documents

KWR designs limited-edition watches combining watchmaking expertise and motorsport-inspired design .

→ Download the Sellita SW200-1 technical documentation (PDF)
→ Consult our FAQ and support page.

The KWR XCT-1 movement is based on the Sellita SW200-1 architecture. Renowned for its reliability and modularity, it is customized here with a black semi-skeleton finish, blued screws, and no date.
To understand the watchmaking context of the caliber, you can consult the English article on Sellita (Wikipedia – Sellita)